🔋 Powerwall Battery Protection

Always Have Battery When You Need It

Left on factory defaults, your Powerwall can be empty at the exact moment you need it. Grid Getter watches your charge level every minute and tops it up automatically — so you're never caught short when peak rates hit or a storm rolls in.

The Problem With "Set It and Forget It" Powerwalls

Left on their own, Powerwalls can leave you exposed at the worst moments.

Empty at Peak Time

Your Powerwall discharges overnight, then peak rates kick in at 3 PM with nothing left in reserve. You end up buying expensive grid power exactly when you were trying to avoid it.

Solar Doesn't Always Align

Cloudy days, shading, and seasonal variation mean solar production varies. Without automatic top-ups, a few overcast days can leave your battery lower than expected heading into a peak window.

Storms Arrive Without Warning

A weather event that knocks out power for hours is no time to discover your battery was at 15%. Keeping a reliable floor means you're always ready for the unexpected.

How Battery Protection Works

Automations that keep your Powerwall ready — without any daily management from you.

Battery Threshold

Set a floor (e.g. 20%) and a target (e.g. 80%). When your Powerwall drops to the floor, Grid Getter switches to Autonomous mode and charges to your target. Once reached, it returns to Self Consumption — or holds at target if you flip the hold toggle.

Peak Time Reserve

At peak start, Grid Getter raises your battery reserve — up to 80%, the highest level Tesla honors for a hold — so your Powerwall doesn't discharge below that level during high-rate hours. At peak end, it drops the reserve back to zero for full overnight discharge recovery. Or turn on Keep battery level after peak window and it keeps whatever charge is left instead.

Pre-Peak Charge

Raising the reserve only helps if the battery has charge to hold. Before each peak window, Pre-Peak Charge forecasts whether solar will reach your target in time. If it will, nothing happens. If it won't, Grid Getter charges from the grid off-peak, as late as it safely can, and stops by peak start. Part of the Adaptive plan; it needs a Peak Time or DemandGuard rule to fill for.

Keep What's Left After Peak

In Self-Powered mode your Powerwall drains to its reserve every night, no matter how much it had left when peak ended. That's an extra cycle on the battery and less backup if the grid goes down at 2 AM. Turn on Keep battery level after peak window and Grid Getter sets the reserve to wherever the battery ended up and holds it until your next window starts. Add an optional minimum and it tops back up from the grid if peak ran it low. In a virtual power plant? Leave it off, since a held battery won't export.

One-Tap Hold

Storm coming in, or just want to keep tonight's charge? Tap Hold on your dashboard and the battery stops draining right where it is. It stays put until you change the reserve or an automation does. Every plan, on web, iPhone and Android.

Smart Automation Setup

Grid Getter reads your Tesla tariff data and proposes ready-to-use automations matched to your rate schedule — including seasonal peak variations for plans like SRP E-27, APS R-3, PG&E E-TOU-D, and more. Review, name, and confirm in seconds.

DemandGuard-Aware

Battery Threshold automatically defers during active DemandGuard intervals so the two don't fight each other. DemandGuard owns the peak window; Battery Threshold fills back up in the off-peak hours that follow.

Minute-by-Minute Monitoring

Grid Getter checks your battery level via Tesla telemetry every minute. When the threshold is crossed it acts immediately — not on a slow polling schedule that might miss the window.

Built-In Recovery

If Tesla connectivity drops during an active window, Grid Getter detects it on reconnect and restores your Powerwall to the correct mode automatically. No manual cleanup needed.

What You Configure

Simple settings. Powerful protection.

01

Set Your Floor & Target

Choose the battery percentage that triggers charging (floor) and the level to charge up to (target). Floor must be lower than target — e.g. 20% floor, 80% target.

→
02

Choose Active Hours

Define the time window when the automation can run — typically off-peak hours (e.g. 7 AM–3 PM) to avoid charging at expensive rates. The automation resets outside this window.

→
03

Enable Hold (Optional)

Flip the hold toggle to keep your Powerwall in Autonomous mode at the target level indefinitely — ideal if you want a guaranteed reserve heading into peak hours every day.

Pre-Peak Charge: one slider, no schedule

Pick how full you want the battery when peak starts. Grid Getter takes the timing from your rate plan and charges from the grid only when solar won't get there first.

  • Target battery charge from 50% to 100%
  • Battery full by, per peak window. If your panels keep producing into peak, a later time lets solar finish the fill instead of the grid.
  • Use weather forecast to factor cloud cover into the solar prediction

Pre-Peak Charge is part of the Adaptive plan and fills the battery for your Peak Time or DemandGuard rule.

The Edit Pre-Peak Charge dialog: an Active toggle, a target battery charge slider at 90%, a Battery full by setting for the 4:00 to 9:00 PM DemandGuard weekday window set to peak start, a note that the panels kept producing about 1.6 kWh a day after 4:00 PM over the last 30 days, and a Use weather forecast toggle.

What Battery Protection Makes Possible

Real scenarios where automatic battery management pays off.

✓ Pre-Peak Top-Up: Pre-Peak Charge checks whether solar will fill your Powerwall before the peak window opens. On the days it won't, it charges from the grid off-peak and stops by peak start, so you go into peak at your target.
✓ Overnight Floor Protection: Prevent your battery from sitting at 5% all night by charging back to a minimum during cheap off-peak hours before morning.
✓ Storm Readiness: Set a 30% floor so you always have emergency backup even if you forget to check the forecast before a monsoon, hurricane, or winter storm.
✓ Cloudy Day Buffer: On low solar production days, Battery Threshold catches the shortfall and charges from the grid during off-peak windows automatically.
✓ DemandGuard Partnership: Battery Threshold refills your Powerwall after DemandGuard drains it during peak demand intervals — so you're recharged for the next window.
✓ Multi-Season Schedules: Smart Automations builds a rule for each peak window on your plan, covering every season, so summer and winter windows are both handled.

Frequently Asked Questions

What is Battery Threshold automation?

Battery Threshold watches your Powerwall charge level every minute. When it drops below your floor, Grid Getter automatically charges it back up to your target — then returns to self-consumption mode (or holds at target if you enable the hold toggle).

How does Peak Time battery reserve work?

Peak Time automation raises your Powerwall's reserve at the start of your utility's peak window so the battery won't discharge below that level during high-rate hours. At peak end it can drop the reserve back to zero for full overnight recovery.

Can I keep my battery charged after peak ends?

Yes. Peak Time and DemandGuard automations both have a Keep battery level after peak window setting. When the window ends, Grid Getter sets your reserve to wherever the battery is, so it keeps that charge overnight instead of draining to your usual reserve. That means fewer cycles on the battery and more backup if the power goes out. Tesla can't hold a reserve between 81% and 99%, so a battery above 80% settles at 80%. You can also set a minimum overnight reserve, and it charges from the grid to reach it if peak ran the battery low. Leave it off if you're in a virtual power plant or sell to the grid in the evening, since a held battery won't export.

Can I use Battery Protection and DemandGuard together?

Yes. Battery Threshold automatically defers during active DemandGuard intervals. DemandGuard takes priority during peak demand windows; Battery Threshold fills back in during off-peak hours.

What plan do I need?

The free plan includes live monitoring, one custom automation and one basic Battery Protection rule. Peak Time rules and full Battery Protection (multiple windows, hold charge, custom days and months) need Scheduled ($4.99/month) or Adaptive ($10.99/month).

What happens if Tesla connectivity drops?

Grid Getter has built-in recovery logic. When your Tesla reconnects, it checks whether your Powerwall is stuck outside its expected mode and restores whichever mode was active before the interruption — no manual intervention needed.

How often does Grid Getter check my battery level?

Battery Threshold polls your Powerwall via Tesla telemetry every minute, so it catches drops quickly and triggers charging before your reserve hits critically low levels.

Why can't I set a battery reserve between 81% and 99%?

Tesla's system quietly rounds any reserve you set between 81% and 99% down to 80%, then reports it as saved, so a "90%" hold really sits at 80%. Setting it to 100% does the opposite: it charges the Powerwall to full from the grid, which can trigger the exact demand charge you're trying to avoid. Grid Getter handles this for you. It snaps any 81–99% value down to 80% — the highest reserve Tesla honors without force-charging — and holds a genuinely full battery by switching modes instead of pinning a number. The reserve you see is the one that actually sticks.

Go Deeper on Powerwall Automation

Battery Protection is one piece of a complete energy management strategy.

Keep Your Powerwall Ready — Automatically

Start with the free report: it shows your backup runway, your outages and whether your battery is charging from the grid at peak. Upgrade to Scheduled when you want Battery Threshold, Peak Time reserves and unlimited automations.

Get your free report

Free. Read-only. Deleted automatically after 30 days.